In this action we are going to perform task for ATP in NSX key.
We can create the ATP server as well as we can create the relay as well so we have both the features
we'll see in the lab and we are going to perform the lab task with ATP server.
Apart from that there is one requirement that when we are creating the ATP server this is the state
full service and must be bound to an age cluster or a specific layer of aged node.
So these are the requirements that we have in our lab but we are going to do that will create one DSP
server that particularly ATP server will give some IP and then will bind with cluster to then will go
and create one.
We'll see that how we can do all these steps.
I'll show you in the lab so you can follow only the steps.
Then we'll go to Tier 0 and then we'll actually look into the ATP server.
So for example if I already have New York City servers 0 and I'll go and create the ATP server 02 then
we need to go inside the segment we should create one segment because this segment I'm going to connect
with the VM who wants the IP from DCP so I'll go and connect this create this will go and connect with
this local subnet or say for example logical segment or subnet it's actually logical segment where I
will assign some subnet we'll see that all list.
So this logical segment will be a catch a tier Zillow Gateway 0 1 all.
And I will add this subnet and the VM that we are going to attach with this particular less logical
segment who will get the IP from the subnet that's the overall goal of this particular lab.
So let me go and log into the NSX manager.
All right.
So we are inside NSX manager here you can see that we have IP server management here we have one of
the Gates episode we're already created.
And suppose if it is attached then you can't delete this can see you can delete it.
So let me go and create one more say here you can see the server type is the HP server you have option
for the HP relay as well.
I'll go and give the name as I say for example DCP 0 2 and then the server IP say 1 6 1 5 0 0 1 and
giving the same IP that we have below as well let's see if we pull through an error
highlight.
So once we have this let's try to save this.
So we are not getting any error related to duplicate object.
All we have is the C might be now what we do that can go to Tier 0 1 Gateway and we'll go and edit this
or let go and litigate here you can see the IP address management.
I want to use the ACP local server although we have option of really server as well or no dynamic IP
address allocation here.
I want to add a zero to here you can see it has been shown to be almost the same click save and now
we're getting there.
So what is the era.
Once you have a mode and edge cluster related configuration they are not changed anymore.
So once we have attach this local 0 a DSP 0 1.
So it is not allowing us to do any changes but both are the same.
So I am going to use the DCP 0 1 that we have created.
So far the scripts are almost similar either you have server 1 or 2 but you can see the area as well
once you do the configuration then you have to go and delete certain services and then only you can
create and attach new services okay.
So let's go back to this segment and I want to create new segment the name of this is a less near DCP
and this is new segment online now.
What's the uplink and type we have we are going to attach it to 0 8 0 1 and this is nothing but the
overlay sic the subnet.
That's a very important thing we have to do.
So we have to go here and set the subnet say 172.
Let me quickly items subnet
you got to say 50 to 1 is the gateway and then let's have the range.
So for example 50 like 50 to 1 6 start 50 guards 60 or so from 50 your typical 60 or 60 and you should
give these so you get as well here.
Otherwise they will throw an error had it applied save it.
Now what I need to do here I need to go and this particular logical segment that we have created I need
to go and attach it to one of the VM so at the moment it is not attached with any of the William so
let's do that.
So let me quickly log into the we use reclaimed and led to the attachment so I'm logging in to inside
the we as a client and once we logged in then I can go to this Web zero for a that's not on at the moment
but I will make this on as well so I can go to edit setting and here you can see that we have network
adapter so for example network adapter 1 click browse.
You should see the logical segment that we have created this list here.
If you click Okay.
Click okay.
And here you can see the network then go ahead and give and do the power on superpower status is now
on.
I will go and open the remote console and will see that while boot up a key.
Take the IP or not if it will not take the IP then what will you do that will go and do some manual
shut or no shut off the interfaces.
So now you can see there to date asking us to log in so let's quickly log in here
and if we go and check the IP address
so one of the interface having IP 172 1 6 6 2 door 14 that's not the DCP range that we have given.
So what we need to do here and there we need to go and check the IP.
We need to change this IP so what I can do here.
What is the interface 88 0.
So we can go and type say for example ie if config.
Say for example 88 0 0 and down and then if you see IP address
First of all make sure this interface is down.
So here this gate is down.
Yes it's a little bit of so we can see
now what we do here that I will make this up so down and up means basically we are doing shut and no
shirt in terms of Cisco configuration.
Still we can see that IP is this inside each zero that should take IP as a from the ATP.
So let's try to do some changes as well here.