Now we are going to perform the lab task for the next.
So what we are going to do here that first of all will create one gateway called Tier 1 Gateway 0 to
that gateway.
I am going to attach with the logical switch and then we are going to perform the next task.
So first of all I'll go and create the destination that rule.
So here we can see their destination IP and the translated IP.
Then I'll go and create the source NAC.
So here you can see the source IP and the translating IP.
And next what we have to do that too.
Once I will rule is there we can go and verify OK so let's do this a step by step let me log into the
NSX manager and let me do all these task.
All right.
So we're inside the NSX manager.
What I can do here I can go to tier 1 Gateway and I can create one more tier gateway.
So for example this is tier 1 and the gateway is 0 2.
This is I can link with the Tier 0 so we can link there.
And the cluster I can go and use for example is close to zero too.
And this is interesting that we should go here and enable all connected segment and service port plus.
I want to advertise all the next IP as well.
So once we have this let's say this.
Yes.
And close the editing.
Next I want to catch you on the Web site segment so we have this logical segment here.
Elizabeth and I want to attach this with the Tier 1 Gateway number to once we go attach close serving
so we have one gateway and that Gateway attach with one of the segment.
Next I want to create the knack to rule for this.
So what do we have to do here.
You can see you have the neck button you can go here click next and first of all on the top in the Gateway
segment you should go and select the correct Gateway and the that rule.
What's the next route.
So for example this is a web three and for this I want to create the next.
So I want to create the destination.
Now Texas my name or the destination.
So for example as but our document 88 880 dot 1 and the translated IP is 1 7 2 1 6 10 dot 1 3.
All right.
So this is the natural IP and the translated IP rule start.
So we set up like to say translated but so we are not giving any port and firewall and all those things.
So let me click save here and I want to add one more rule this time say for example web and this is
three a source.
Net in the drop down menu I can go and select source at the destination IP this time it is something
like we are going to reverse it.
So we'll go and give the source IP as a destination IP here.
And so as IP means who is going to ensure the traffic from inside translated IP again.
So whatever we have done we are just giving the rewards of that are doing the reverse of that.
So now I have one rule here I can see that is destination that is key to this IP and then the source
net that is 172 wins extend or tied into this IP let us say this bill also up and our rules are up and
ready.
So now what we can do here that we can go and verify this rule.
So let us stop here and in the next section we'll go and verify this.