We are going to perform one lab.
The lab is related to uplink profile lab.
We have seen this uplink profile.
We can go to the profile and we can create the uplink profile and then we can associate this profile
with the host while creating the profile.
We are getting this option related to a catch.
What type of overlay are we learn or what type of segment.
Is this the giving policy the transport.
Plan the empty you the network Io control exit the network our control is again that we can go and create
network Io control profile this also will see after this particular lab after uplink profile we have
task here so for example in task one I have to create uplink profile for EA's excite and that is the
hypervisor and do the uplink profile names should be UPC one day gaming policy should be well over the
active Uplink is a new one you'll stand for uplink and just a name you want and this brand brings you
to the uplink slag port one port to the uplink you two is a lag port to report for will and should be
under the M2 should be 1 7 0 0.
Once we create this particular uplink what we need to do here that we have to go and we have this transport
node we have to go here and then this particular profile I have to go inside the host and map like this.
So my end with is the uplink a new one say hey I can see that to you and you one is marked with the
VM Nic so a physical link when we nick one and B M Nic two that is physical link one which can link
to is killing 3 and 4 it will see that how many fiscal links we have.
So for example if I have only one critical link in my host then I'll map you you 1 with B1 and you 2
with P3 or P4.
So we see that whatever resources we have in terms of uplink I will call there and I'll use that in
the same we have to create the uplink profile again I'll create one new applet profile is exciting and
giving them so let's do this thing let's do the first task first and then we'll go and we'll do the
second task so let me go and log into the NSX manager and from there I will create this profile I like
I am inside and as a manager I can go to the system once we are inside the system I can go to the fabric
inside fabric you can see that we have option related to profiles in profile we have a profile in our
U.S. profile and risk profile so let's go and create uplink profile I'll go and give the name as it
is say you BP when this is you can give good description here I have given just to you BP 1 Now what
is there in the cushions here you can see that.
Give the name either you BP when the teaming policy is failover activities you stand by is you do so
well go here let me go alone we can go and check this scheming it you can see there screaming Is there
default is there and the gaming policy is fail lower order I can go and give the active and the standby
so I'll go here and click this pen Silverton Uplink is a new one is just the name and the other a standby
link is you too.
No this isn't the new transport we land it is the one hundred as per the purity and 1 7 0 0 is M2 now
we have to create this lag so let me show you what we have done so far.
Name Philo where we are using default looming policy you when you to uplink lag and lag so what I do
that I'll create this uplinks for link aggregation protocol click Add and click at I.
Oops let me delete when on it so this I'll give name has a new one this is one of the lag group and
this I'll give as you.
As for the people they have done everything like that well you know once we are done with this particular
profile you can see that now your uplink profile you people one uplink port when it sector an enemy
can you know what I need to do I need to go to the nodes and for example I want to attack this with
one of the E6.
So what I can do here I can go to the nodes inside nodes you can see that we have option that we can
select a V Center once we are inside the V Center let me go a little bit so we can see that you have
your 6 8 1 6 8 1 Jews E6 Hey 1 click it once you click.
And once he go next here you can see that you have option and inside the option let me fix this a screen
so here you can see that you have the options and inside the option if I scroll down you have this invidious
name and we use one network input output Ah you see proof I will see in the next section about this
and now you see uplink profile I want to use the uplink profile that I have created before doing that
because the uplink profile name is NSX default uplink host switch profile so that it in here in the
bottom you can see the physical NIC.
We have Nic as if his clinic of the host and the uplink.
This is the uplink or you can for the moment you can think like this the physical interface of the invidious
yes.
So now if you go ahead and if it changes to you PPE one cell go and select you repeat one once I do
that then you will see that in the bottom this group has been changed so it is showing that now you
have you when and if I click here you can see that you have you 1 0 you 1 1 so you have 4 interfaces
now it is clearly showing we have taken the lab lab group so we have taken the lab group like you one
and you two worked here you can see that we have Option 2 mapping out correct.
So here if you see you have you 1 and you 2 I could then go and my mat because in my configuration inside
you when I have taken to puts
know what I have to do that I can go here click whatever available physical interfaces I have related
to.
So here I only won the map this way.
It is so you can clearly see how we can map this click finish and then.
So this was this was the lab number one that we have done.
Now let's go and do this lab where I'll create one more profile so let me go and create one more uplink
profile.
That is nothing but the E6 I won the in policy like that will do so let's do this the best.
So again I go back to the profile section and was saying inside the profile section I want to add one
new the name is for example.
Yes X I
can give any name any description here.
There is no lag and deeming policy is so sport so you can go ahead and check this streaming policy as
per the configuration it is load balancers so here you can see the gaming policies.
So sport active link both you win and you two are active.
There is no a standby and V'landys can still go here and add the uplink.
So here you can see that you win and you two both are up.
There is no standby no order here then here that I have used like you when you two have the uplink and
then watch the transport we plan to transport end for example Wellington there is no M2 that I want
to set.
That's the profile click at now here you can see that you have at the ports you when you do this the
profile.
Now we have to create one more profile this time the name profile is key we m failover ardor activist
and maybe like 20.
This we are going to use inside the inside the giving him so before going there are create created because
we are already in the plan profile such and so let's create gave me ABM and then there is no lag then
we have the teaming policy that's the failure and the filler order that's the default then I have active
link is you 1 and the standby is you 2 and the real end is 20 you can reach for the slide I am referring
the caution that we have click ahead.
So now you have two newly created profile E6 I and Korean.
Let's go back to the Lords and let's use it.
So I am here inside the E6 I haven't some issue because there is some thing that we have change cells
revert backwards.
Those changes.
No no problem.
Still you can see we have this error now order they do I'll go here and I'll apply that policy to E6
I 0 2 time here and click Next once I am here I can go and change.
So here you can see the uplink profile is defied.
Which ones I'll show you all these things I will revert back to contradictions or we will not break
anything.
Whatever set altogether.
So what do you want to do here.
We want to use the uplink profile E6 I will use that.
And then what do we want to do that to you.
One is attached with this.
As per the caution then.
Now I want to change this for the giving him so I'll go here and use this as standalone host.
That is nothing but the giving him.
I'll go next will go to configure NSX and here you can see the uplink profile.
I'll go and change this uplink profiles where you can see this fiscal interface mapping.
I have to change so if you go and check here that this uplink to be when we have done.
Now I want to do you want to be one and then something like you can see clearly in the diagram.
Activists can make is working as an activist and make correct.
All right so let's do this.
Let's go and select the JVM once you select that if you scroll down you can see that new ASCII and you
Whitey what we have we have so many interfaces here.
I want to use this.
Eat one
so let's do this thing because I have a zero and even I'll add one more so I can show you both the things
and then here I will go and add the e..
1 So they say the E went to you too.
This is actually perfect.
So now you can see that you have.
You want to be when you do two people to stand by.
So you want to be when you're too stupid to finish
so this is the way we can create and logically we can map it okay.
So let's just stop here and in the next section will a study about network Io control.