So as a next step, what we are going to do, we are going to want to fight this fight, to fight them
in some situation, when you have a follow through and you want to put it in this video, we are going
to show how we can demonstrate what you can do with the power to fight the political side in order to
bring the fight to save the.
Agenda point of view I was held for today, we will be discussing about what we can consider for don't
forget, I said.
Let me show you what is our best bet in order to configure that designation, parameters are required
and then verification and later on, any question on.
So in that perspective, the next step, we just show you what is our technology in this topology,
in this diagram, as you can see, we have a lot of device.
We have a four particular device.
They are connecting to different interfaces.
As you can see, we get a seven and this is connected to 200 1.0 for people who can make sure to use
these two networks to each other.
If you want to build a site, despite them looking forward to 140, 40 days that you are sitting in
this office and this is your customer and they have already configured in overlap as well.
We have already considered the four digit percentage of barometer's all.
You just need to make sure you can.
The Palo Alto one network point of view, the landline, because you the landline traffic we have already
configured, we have our machine is 10.1 that level and is going to 102, 168 to zero one network.
And this is behind me just cumulating that this is behind four digit network.
What are the features?
I don't want to show you if I've been to 102, 168 to zero, one to one, you can see it is not working
on the pressure point of view.
We can see it is the only digital and wonderful number 240 and just the next top IP and nothing else.
The background, as you can see it, is reaching up to here to 40, but if it's not reaching up to further
beyond this point, because from Palo Alto 14, it is considered a barometer has already been configured
for Fortinet, but has not been considered for the following.
So let's start from the overt backing of point of view.
We should be very comfortable with this diagram to show you that one side is looking at one side is
one of those is the tunnel interface.
We've been competing against that.
We have to check it out as well from the bottom to and from the from the footage as what we become very
skeptical of the 10.1 Network that this technology is very much on up here for now.
We also need to have some parameters in order to configure the public to the date certain we need those
governments.
Most likely you will be receiving those from the bottom one of your customer or one of the third parties,
maybe in an email or maybe through a spreadsheet that we have as one parameter.
As you can see, encryption, as you and this group have been Shirkey is the application method.
We also see that this has to be true as well, which we have been doing on the fiscal side.
We have the local team from the Palo Alto and the remote prior to 07, the other two network that are
connected, not directly connected, but they can bring each other.
Then we have the local network and network and then we have the remote network for it.
This is already a Lubeck interest in our network, but in order to configure that, we already have
a special.
We have also our other workbook and this workbook will show you how we can configure Step-By-Step on
all to the particular site to site the Internet to this workbook.
You have put all the time if you are considering.
These steps have already been documented.
Will you please refer to your book and you will be able to configure all the permits, all the communication
from them.
So this is in the situation.
Budget control assumptions then that this is the technology, the same technology we already shown.
Also, you can see the spreadsheet.
Then also, this is the task force here, they has a small office in the foothills and we want to configure
them, our systems that you want to make sure the land traffic must be protected in order to be submitted
as part of our triple digit one.
So that is our task.
And in the task, these are the meetings we have and all of these steps will be considered from the
panorama.
So what these steps are considering the parliament is considering the proposal, phase one, to continue
to get better fast, considering the route, adding, ending the rule as well, and then considering
it pushing this from the on the site, and then you can verify from the present danger.
So, of course, if you want to consider that of a panorama, we already have.
And I wonder, do you need to log in to that the password, please, for the password.
For the spreadsheet.
But first up, of course, you will be referring to.
Not work that most often and that you will be laughing at your medicine is not complete.
And from there on, what you will be considering an interface and you would be configuring a tunnel
interface that's an interface or one.
It can be any number, but based on our topology.
If you look at this topology diagram, we have a to over.
No.
And then just some comments here to make sure that it is in the security zone.
And then.
At the next.
And let me just if you that.
So here we can see we need to go.
It is a panorama and from Panorama you have to go to the network, you need to go to templates as the
template is at your interface.
If you need to select the channel interface, you need to select critical interface for yourself.
That's the only difference would be totally tells me if he just told a one on one trying to move.
You don't need to configure an interface, I use the sorry.
It's in the interest of the table and you should be putting into the Libyan.
No evidence is required and nothing else is required.
So these are all the parameters we need to configure, but that's OK.
That is one step one.
As you can see, this is the final interface to which one is created.
That is a good first step, which has already been documented here.
And the next step we need to configure is one parameter.
Those has already been explained in our previous in the spreadsheet as well.
So we need to go into the.
In the same template here, we are considering we already configured for the fiscal parameters.
The best thing is you can Clunies.
And this is not a group to ask what our family does.
This is 19.
And this is just.
And that's it, this is our phase one barometer's, I can figure.
As a group 19, that is already being considered.
Now let's go into the fiscal parameters.
So we already have Cisco, I'm just calling it.
And making that making changes much like.
OK, we are using E.S.P, as we can see, the next step is we are using ESV to Polders.
And one and the group is to ask for our.
Birgit.
The next step would be.
We need to configure the gateway parameter.
This is a very long step century.
You can see we cannot take any going here.
Unfortunately, but let's try to configure from scratch.
As one.
We need to make sure we are using the conflict before it interferes our IP.
This would be 200 wonderful people have been as but exactly spreadsheet, local interface.
And we can pretend to be an IP address.
And the price for this you can configure I can take it from the spreadsheet from here and I can put
it here.
Then you need to go and configure the password.
Just go one, two, three.
My recommendation is because we can make some mistake.
It is always better to copy and paste the.
It was capital to school, one, two, three, and then I can just copy and paste here.
OK, and you can verify as well.
Then the local ID IP address and what is your IP address here?
210.
He appeared in the kitchen, is also identifying with an IP address.
Someone and this is where you can use your spreadsheet.
David.
In some of the advanced options, and you can see.
And also, you need to make sure that the exchange the.
And I think, one, you need to use, the Krypto, which we have already created, is one parameter.
These guys went down because we just configured here and then click, OK?
But just to repeat again, very quickly, we can forget the interface, then we can skip this one barometer
spreadsheet and also the data.
These are the four steps we have already gone through so far.
And the next step, what we're doing is, yes, we are creating as the next step.
If this is the next page, we are going to have to go sleep and aesthetic.
OK, let's look at the background we have from here.
What do we need to say, 100 to 150 to one?
That's the steady growth we need to configure.
So with regard to the Stratego, we need to go into the alternative and we are using F and the R.
This is where we have let the steady growth and with regard to the steady growth.
What do you just have to go?
You will be configuring?
To 162 one.
So I'm just going to have to go out and get it from here.
And we are pointing to that two to one.
No need for an actual baby.
I'm saying the.
So these are these just the name of this article, just the subject, Mark and 32 and an interface standard
to zero, and that's it.
So far, I can think of the phone interface because you can see it's one piece to get me and because
these are the five that we have configured as the next step.
We need to consider it a six step now, this is you can you need to go to the IP Central and hear.
As you can see, you're going to take a clone of it, unfortunately, you need to create a game as I
look at the parameters.
We have some definition examples we have, you bastard you.
So if you are using our pocketbook to configure your site to the guidelines, just these are just two
examples, configuration example, you need to appreciate the quality of your IP addresses that you
can configure.
Then after that, the phase two parameter we have configured.
And also the disengagement, and then they took me to the file and this will give me.
And then we have the we have to configure the proximity.
Which means that if the traffic is coming in the city from end up on the road network, going to 190
to 160 to zero network for any kind of traffic stop, traffic should be restricted to the proximity
point of view.
Proxy local IP will be 10.1 dollars 11 years before the vote will be 192, 168 to zero one one slice
32.
And for any political.
OK.
Don.
The next step would be that we can configure our security policy as well, which is important.
If you do not create a security policy, more traffic will be initiated from the.
So I have to configure Trustwave.
Either way, either way, can anyone can allow the traffic.
And this is what we need to configure to figure this all, you don't need to go to the policy and get
on board at your device group.
This is where I can configure my rule.
So as you can see the mess, this is all we have to configure.
So what I can do, I can take a clone of this one.
So look at this is the rule we have configures.
Description and everything.
The name of the source traffic will be from US military because that somebody.
And then we need to send 100 to 160 to zero one to dispatch 190 to 160 of the wonder.
When you calculate an object, all you can just put an idea if you can create an object definition part
of you, because we want to make sure that if the traffic is initiated either by 10.1 the Devil or 100
to 150 to one, the traffic should be permitted to traffic should be permitted.
That's why we put source and destination both in the same zone and the same network as well.
But any application for any services that traffic should be permitted.
So we have already created our mood in our device group, which called at your device group, device
group which we have already created, which name as Buddle Maspero 52, where we are going to traffic
between the two subnets along the dot.
If you keep in mind that you need to also allow the IC as well, which we have already completed in
the previous video for the sheer group where we are the IC actually traffic.
If you do not allow the IC, then as the phase one, if the traffic is not allowed or is not initiated,
that will not be.
The traffic was never kicked in.
So that is also probably a prerequisite.
You need to make sure you have.
That going forward, we need to go to the footy, get piebald, and there are many steps we need to
follow them.
And in the meanwhile, what we can do is we can push all of these configuration.
Savir, to the panorama, first of all, quickly.
Then you push to the push into the divisive and divisive election point of view.
I try not to push anyone else, just the one by one, as we can see, and force template values and
expression if it takes some time.
So while this competition is pushed, let's go into the voting right now.
So let's take what we have done on the putting in the effort to get the interfaces already configured
to zero seven seventy five wonderful people.
Along with that, we also reconfigured to do better.
That's what the final reason is, because it could have any real network yet.
So we just simulating with the packages which we have already created on our site.
Which is already collected along with that.
This is what we need to be created.
We are the sum of the services as well.
So if later on you will be configuring your VPN by using all our technology, your VPN will already
be configured on foot.
You don't need to configure anything.
So that is a long thing is allowed you to be assured that everything is in order.
Then along with that, but the next step is you need to configure.
You can run a business.
And that result, for example, you can run from the BPM section.
There are many if you can see IP reside, which you can be, which you can easily run from the.
Yeah, OK, it's just you need to select the customer.
If you select go to a bizarre setting and then in this you can say, I want to run the customer, give
given name, actually.
And after giving the name, giving the static IP address and all this information has already been captured
here.
You don't need to do anything.
For example, here I just go to the next, so this will show me the next screen where I can put these
mountains to all those barometer and I can something like configuration.
But as we said, this has already been configured and I can quickly show you will be able to be configured
if because go the IP Seftel this is already built in to.
If I go to it did the Academy does have only been configured.
OK.
That's the perimeter that's already been configured right now.
The tunnel is done because the traffic is not moving because although this tunnel, you can see it's
done and also the traffic is still not only because we just finished our configuration.
But then again, if figure got the.
All those configurations.
It has been very well documented that we need to configure our petticoats as well to the time from this
site.
On this side, back to this network.
Which is already done for you.
And then we can figure out the rules and policy as well.
These rules and policy need to be configured and after that, waiting for people to to complete these
changes and then you can verify which we are already doing what you do once you get to the one one site.
And tracing the road, we are reaching to the traffic.
And then we can see the families up.
This is the firewall is the actual firewall, the configuration of still pushing up from there?
We cannot see any tunnel is big so far.
Yes.
But up is the previously General Francisco, but we haven't seen any dialogue because the Constitution
has been pushed, if we can think of the task, actually.
We can see 10 percent of the configuration has been only completed, so you just need to be a couple
of more minutes and after that you will see the configuration traffic.
Also, you can verify from the Fortinet will point to the monitor and your customer, you can ask the
customers to make sure that number is up.
So hopefully they the configuration parameters and everything is fine.
We proceeded to look it up and we will see the traffic is also going of.
But.
You can see up to 75 percent is completed.
You can see the traffic is still not reaching over.
And just jaw dropping test was not completed.
You can see the film is done, but there's no traffic passing.
I tried to bring it up from his site.
Did not foresee any topic.
Also from this site, no ping is coming up, phase two is not completed, so there's something wrong.
So the result is not up, but quickly, let me check the troubleshooting some of these so we can see
this panel is not coming off.
But as you can see, the tunnel is not coming up when they go to monitor.
And I checked the system and I can up the VPN.
But I can see.
It is failing.
Excessed.
Deardon.
The.
Failed, there is some controversial.
So you can see right now the penalties up.
The we will be pretty deeply iapetus and a Desert Storm was not coming up.
Now, if I do the translation, you can see it going to the fight and ultimately switching to the end
point in between any network, any subnet, any public.
I this is not feasible.
You can also see the traffic is going to determine who is up there.
And you can see traffic is forwarding through the can you bring it down, for example, and we can bring
it out.
OK.
The result?
Yeah, I don't know.
Coming up.
And from the political point of view.
And see, there was a pretty shaky mismatch, now you can see it is working and the traffic.
Two parties at the point of view, look at the screen showed up.
You can see.
And this is an information you can see the local.
Pretty remote here, and that traffic is going to be the.
So this is how you can configure a flight perspective
as well as the.
Organic as well as.
One final well, you're going to join.