Securing Network Communication with Cisco VPNs
by Martin Brown

Once an organization has selected the right VPN for their needs, someone will need to add the VPN configuration to the router and this is where you come in, however, it's also important to know how it's done and this is where this course comes in.

This course is part of:
Cisco SVPN (300-730) for CCNP Security Path

Course Overview 1m 43s
	Course Overview 1m 43s
Configuring IPSec VPNs 35m 2s
	A Review of IPSec VPNs 3m 45s
	Configuring ISAKMP Policies 7m 36s
	Creating IPSec Transform Sets 4m 42s
	Classifying Interesting Traffic with ACLs 4m 42s
	Binding the Components with a Crypto Map 6m 22s
	Setting a PSK with Tunnel Groups 4m 31s
	Working around NAT Issues with NAT-T 3m 21s
Implementing GETVPNs 28m 53s
	An Overview of GETVPNs 3m 14s
	Creating a GETVPN Interesting Traffic Access List 4m 17s
	Configuring a GETVPN Key Server 11m 3s
	Adding Group Members to a GETVPN 7m 22s
	Analyzing GETVPN Encrypted Packets 2m 56s
Enabling DMVPNs 26m 39s
	A Recap of DMVPNs 3m 30s
	Configuring Hub GRE Tunnels and Next Hop Servers 3m 5s
	Configuring Spoke GRE Tunnels and Next Hop Clients 8m 29s
	Protecting Data with IPSec over GRE 7m 39s
	Avoiding Fragmentation of Tunnelled Packets 3m 53s
Configuring FlexVPNs 32m 59s
	An Overview of FlexVPNs 3m 4s
	Creating IKEv2 Keyrings 7m 10s
	Building IKEv2 Profiles 5m 24s
	Configuring IPSec Profiles 2m 9s
	Creating Virtual Templates on Hub Routers 4m 22s
	Enabling Tunnel Interfaces on Spoke Routers 6m 51s
	Creating Virtual Templates on Spoke Routers 3m 56s
Troubleshooting Site-to-site VPNs 52m 44s
	Diagnosing VPN Connection Issues with Syslog 4m 27s
	Utilizing Common VPN Show Commands 10m 12s
	Making Use of Show Commands with GETVPNs 5m 56s
	Troubleshooting DMVPNs Using Show Commands 3m 44s
	Using IKEv2 Show Commands with FlexVPNs 3m 47s
	Debugging IPSec VPNs 9m 38s
	Using Debugs with GETVPNs 6m 40s
	Making Use of Debugs with DMVPNs 4m 31s
	Debugging IKEv2 and FlexVPNs 3m 44s

Level Intermediate
Duration 2h 58m
Released 2 Apr 2020