Cisco Enterprise Networks: Implementing OSPF
by Ben Piper

Learn how to configure the OSPF dynamic routing protocol from start-to-finish for both IPv4 and IPv6. We cover LSA types, areas, timers, route redistribution, authentication, and route summarization.

This course is part of:
Cisco ENCOR (350-401) for CCNP Enterprise Path

Course Overview 1m 26s
	Course Overview 1m 26s
Implementing OSPF 23m 50s
	Course Introduction 2m 4s
	Why Was OSPF Invented? 5m 32s
	OSPF Areas 3m 36s
	Area Types 2m 15s
	Normal Areas 5m 47s
	Stub, Totally Stubby, and Not-so-stubby Areas 2m 43s
	Summary 1m 50s
Configuring OSPF for IPv4 46m 0s
	Introduction 1m 26s
	OSPF Neighbor Operations 5m 29s
	Normal Areas 8m 19s
	Stub Areas 3m 33s
	Totally Stubby Areas 4m 18s
	Not-so-stubby Areas (NSSA) 2m 18s
	Virtual Links 2m 29s
	Designated Router Election 2m 58s
	OSPF Network Types 3m 3s
	Authentication 5m 50s
	OSPF Route Summarization 3m 21s
	Summary2m 50s
Route Redistribution 42m 25s
	Introduction 1m 19s
	Redistributing Connected Routes 6m 46s
	Redistributing RIP into OSPF 2m 16s
	Route Maps and IP Prefix Lists 4m 50s
	Using Route Maps for Redistribution 6m 43s
	Summarizing External Routes 3m 16s 
	Injecting Default Routes: Part 1 8m 3s
	Injecting Default Routes: Part 2 3m 57s
	Summary 5m 11s
Configuring OSPFv3 for IPv6 22m 59s
	Introduction 1m 45s
	What's New in OSPFv3? 2m 15s
	Enabling OSPFv3 8m 16s
	IPv6 Route Redistribution 5m 13s
	Summary 2m 16s
	Course Summary 3m 12s

Level Intermediate
Duration 2h 16m
Released 26 Feb 2020