COMMENT_PUBLIC -------------- PRIMERGY TX1320 M2 / TX1330 M2 uEFI FW changes: uEFI FW V5.0.0.11 R1.29.0 for D3373-A1x ============================================== Changes and problems fixed: - Update CPU microcode to 0000F0h - Vulnerability: Solved Intel-SA-00615. Following CVEs are addressed. (Intel-SA-00615: CVE-2022-21123, CVE-2022-21127, CVE-2022-21125, CVE-2022-21166) uEFI FW V5.0.0.11 R1.28.0 for D3373-A1x ============================================== Changes and problems fixed: - Update CPU microcode to 0000EAh - Update SPS FW to SPS_E3_04.01.04.306.0 - Vulnerability: Support for IPU2021.1 (Intel Platform Update). (INTEL-SA-00463: CVE-2020-12357, CVE-2020-8670, INTEL-SA-00464: CVE-2020-24512) - Vulnerability: Support for Intel 2020.2 (Intel Platform Update). (Intel-SA-00381: CVE-2020-8696, Intel-SA-00389: CVE-2020-8694, CVE-2020-8695, Intel-SA-00391: CVE-2020-8705) - Solved the issue that BIOS configuration backup/restore don't complete correctly when any error happens in that processing. Added retry mechanism at max. 3 times. - Solved the issue that UEFI OS can boot even if all boot options are disabled. - Improved the help message of "Active Processor Cores" shown in Help area of BIOS setup by adding the meaning of "0". - Changed some BIOS Setup name related to Secure Boot as below. This modification has no effect on BIOS behavior. Secure Boot -> Secure Boot Configuration Secure Boot control -> Secure Boot Control System Mode -> Platform Mode Provision Factory Default keys -> Factory Default Key Provision - Update LSI RAID Driver to 06010A00 - Vulnerability: Fixed CVE-2019-14575 uEFI FW V5.0.0.11 R1.27.0 for D3373-A1x ============================================== Hint:please stop Server view agent before SLES12 SP5 ASP Changes and problems fixed: -BIOS settings may not be remained after replacement of system board with old BIOS revision. Fixed to ensure restoring between old and new BIOS revisions successfully.(SA233717720, QH200807-001) -Solved: DIMM uncorrectable error, DIMM correctable error, and PCIe uncorrectable error will not be logged in SEL. System might continue to run if PCIe uncorrectable error was occurred. *Caution:This issue is included in R1.24.0 -R1.26.0. If you use those BIOS version, BIOS must be updated to 1.27.0 or later. -In the case of IERR due to DIMM-UE, BIOS detects DIMM-UE during next boot but continue to use the failed DIMM. Solved to reset and disables failed DIMM when BIOS detects DIMM-UE during boot. -Network Stack setting is not restored via SNTCI because this is excluded from backup/restore. Added to backup/restore target. (SA233725375) -NMI is not issued when memory uncorrectable error and PCI uncorrectable error are detected. Solved to issue NMI when memory uncorrectable error and PCI uncorrectable error are detected, so that OS may be able to handle uncorrectable error event. uEFI FW V5.0.0.11 R1.25.0 for D3373-A1x ============================================== Changes and problems fixed: - Integration of Intel QSR 2020.1 update (CVE-2020-0594, CVE-2020-0595, CVE-2020-0586, CVE-2020-0542, CVE-2020-0596, CVE-2020-0538, CVE-2020-0534, CVE-2020-0533, CVE-2020-0566, CVE-2020-0532, CVE-2020-0541, CVE-2020-0597, CVE-2020-0531, CVE-2020-0535, CVE-2020-0540, CVE-2020-0536, CVE-2020-0537, CVE-2020-0545, CVE-2020-8674, CVE-2020-0539) - RX25x0M1 : BIOSenters deadloop if PCI Confg Read to non-existent device. - TX13x0M3 : The Slot number of PCIe UE SEL is incorrectly recorded when CPU PCI bridge detects PCI UE. uEFI FW V5.0.0.11 R1.24.0 for D3373-A1x ============================================== Changes and problems fixed: - Integration of Intel QSR 2019.2 Q2 update (CVE-2019-0117, CVE-2019-0123, CVE-2019-0124, CVE-2019-0169, CVE-2019-11132, CVE-2019-11147, CVE-2019-11105, CVE-2019-11088, CVE-2019-11131, CVE-2019-11104, CVE-2019-11097, CVE-2019-11103, CVE-2019-0131, CVE-2019-11090, CVE-2019-0165, CVE-2019-0166, CVE-2019-0168, CVE-2019-11087, CVE-2019-11101, CVE-2019-11100,CVE-2019-11102,CVE-2019-11106, CVE-2019-11107, CVE-2019-11109,CVE-2019-11110,CVE-2019-11086, CVE-2019-11108, CVE-2019-0185, CVE-2019-0154) - Resolved an issue of PCI error at POST after PCI slot status change. - Minor bug fix uEFI FW V5.0.0.11 R1.23.0 for D3373-A1x ============================================== Changes and problems fixed: - Update to Intel Skylake Microcode ID 000000CCh - Integration of Intel QSR 2019.1 update (CVE-2019-0086, CVE-2019-0089, CVE-2019-0090, CVE-2019-0091, CVE-2019-0092, CVE-2019-0093, CVE-2019-0094, CVE-2019-0096, CVE-2019-0097, CVE-2019-0098, CVE-2019-0099, CVE-2019-0153, CVE-2019-0170, CVE-2018-12126, CVE-2018-12127, CVE-2018-12130) - Integration of fix for Intel Transactional Synchronization Extensions (TSX) Memory Ordering Issue - Integration of Intel DCI Policy Update (CVE-2018-3652) - Fixed an issue that led to random occurences of POST message "POST - No memory installed" during system startup - Fixed doubled boot options with RedHat 7.5 installed in UEFI mode uEFI FW V5.0.0.11 R1.22.0 for D3373-A1x ============================================== Changes and problems fixed: - Update to Intel Skylake Microcode ID 000000C6h - Update to Intel SPS FW SPS_E3_04.01.04.54.0 (INTEL SA-00086) - Fixed Side-Channel Analysis Method Vulnerability - (CVE-2018-3639, CVE-2018-3640, INTEL SA-00115) - Fixed an issue with incorrect system time change due to Daylight Saving uEFI FW V5.0.0.11 R1.21.0 for D3373-A1x ============================================== Changes and problems fixed: - Update to Intel Skylake Microcode ID 000000C2h - Fix for side-channel analysis security flaws - known as Spectre & Meltdown - Improved handling of SPI BIOS flash device uEFI FW V5.0.0.11 R1.20.0 for D3373-A1x ============================================== Changes and problems fixed: - Update to Intel Skylake Microcode ID 000000BAh - Resolved an issue with Nvidia NVS315 GPU causing PCIe SERR error messages being logged into iRMC SEL when Windows Server 2016 is installed uEFI FW V5.0.0.11 R1.18.0 for D3373-A1x ============================================== Changes and problems fixed: - Update to Intel Skylake Microcode ID 000000A6h - Resolved an issue that led to a system hang up when the system was idling in uEFI FW setup for more than 30 hours - Resolved issues that a memory dump was not created when initiated by pressing the NMI front panel button - Removed a duplicate entry in uEFI setup in case a TPM module is present in the system uEFI FW V5.0.0.11 R1.14.0 for D3373-A1x ============================================== Changes and problems fixed: - Resolved highly sporadic occurrence of system being powered down after repeated logging of error message "POST - No memory installed" / "BIOS POST Watchdog - Action: Hard Reset (Post Code: 0x55)" in iRMC SEL after warm reboot - Resolved issue regarding Windows Server 2016 logo compatibility uEFI FW V5.0.0.11 R1.13.0 for D3373-A1x ============================================== Changes and problems fixed: - Update to Intel Skylake Microcode ID 0000008Ah - Support for BIOS Parameter Backup without a dedicated reboot - Added network inventory support for Intel LAN PCIe adapters (X710-DA2, X550-T2) - Minor bug-fixes uEFI FW V5.0.0.11 R1.11.0 for D3373-A1x ============================================== Changes and problems fixed: - Update to Intel SPS FW E3_04.00.03.95.0 (PLR2) - Update to Intel Skylake Microcode ID 00000084h - Update to VGA BIOS 3.8SV (supports Windows 2016) - Update to AVAGO EFI driver v04090000 for onboard SW-RAID - resolved behavior that user password cannot be changed without admin password by using eLCM RestAPI - resolved sporadic DIMM ECC error under specific UEFI FW online update circumstances - resolved issue that after disabling TPM support in UEFI setup, Trusted Computing menu disappears after next reboot - moved password prompt during POST before OPROM scan - resolved problem that in case of disabling a single DIMM of channel by UEFI setup next boot ends up in a hang condition uEFI FW V5.0.0.11 R1.10.0 for D3373-A1x ============================================== Changes and problems fixed: - Fixed a critical TPM handling problem during OS runtime uEFI FW V5.0.0.11 R1.9.0 for D3373-A1x ============================================== Changes and problems fixed: - update to Intel SPS FW E3_04.00.03.89.0 (PRL1) - update to Intel Skylake Microcode ID 00000074h - removed external NIC MAC addresses from system information setup page - resolved POST screen corruption after password prompt/legacy ROM init - resolved unexpected ACPI messages under Linux RH7/SLES12 - resolved that PXE boot from LoM port2 can?t be established via VIOM - resolved behavior of unexpected power on if system was powered off after WOL before OS boot finished New features: - support of onboard SoftwareRAID solution (enabled uEFI FW setup switch) - support of TPM 2.0 IMPORTANT HINT: SoftwareRAID support requires OS driver >= V17.01.2015.0716. In case of ServerViewRAID usage a version >= V6.3.6 is mandatory. Both packages can be found on common FJ download path. uEFI FW V5.0.0.11 R1.7.0 for D3373-A1x ============================================== - Initial Release COMMENT_CRITICAL ---------------- BIOS- or firmware updates always require a closing system reboot. Important notes for Windows Operating Systems =========================================== To enable BIOS / firmware updates, the BitLocker Drive Encryption must be temporarily disabled. After the updates have been completed,the BitLocker Drive Encryption can be re-enabled. Important notes for Linux Operating Systems =========================================== XEN operating systems: ------------------------------------------------------- Currently BIOS updates under XEN are not supported. To update the BIOS please boot the system in non XEN mode or use offline update from Update DVD. COMMENT_INTERNAL ---------------- ASP Frame Version Windows: 04.70.33 PrimeUpUnzip: 6.00 DeskFlash: 06.76-0076-UEFI do_deskflash: 1.0.0