CHANGE LIST FOR 10.8.0.1.20200416.1377347


=== 10.8.0.1.20200416.1377347 <<  

Change 1377347 on 2018/10/18 by anurkuma@E_Conn_work

	Sending all 10.1dev work to mainline for 10.1 release
	
	Merging
	
	//depot/branches/AdobeConnect/10.1dev/...
	
	to //depot/main/AdobeConnect/...

Change 1375519 on 2018/09/01 by ngoyal@ngwx1

	Merging
	
	//depot/branches/AdobeConnect/10.dev/...
	
	to //depot/main/AdobeConnect/...

Change 1368009 on 2018/05/23 by ngoyal@ngwx2

	Merging
	
	//depot/branches/AdobeConnect/9.8.1Sustaining/...
	
	to //depot/main/AdobeConnect/...

Change 1320057 on 2015/12/15 by akajain@connect_akajain

	Merging components folder
	
	//depot/branches/AdobeConnect/9.5.2/components/...
	
	to //depot/main/AdobeConnect/components/...

Change 1296700 on 2015/02/27 by anirsing@anirsing_depot1

	Merging
	
	//depot/branches/AdobeConnect/9.5.0.Flamingo/...
	
	to //depot/main/AdobeConnect/...
	Part 4 of 9  

Change 1295533 on 2015/02/12 by anirsing@anirsing_depot

	Rollback to CL#1294861

Change 1295416 on 2015/02/11 by anirsing@anirsing_depot

	Back out changelist 1295098

Change 1295233 on 2015/02/10 by ppatil@ppatil-w7

	Bug # 3851006: ENH : Internal ; AR Intercall  audio loss\disconnect.
	Bug # 3850917: Internal ; AR Intercall  audio loss\disconnect.
	https://wiki.corp.adobe.com/pages/viewpage.action?spaceKey=Breeze&title=Intercall+Disconnect
	Refer to https://reviews.corp.adobe.com/go?page=ReviewDisplay&reviewid=1613647 for Testing Results

Change 1295098 on 2015/02/10 by anirsing@anirsing_depot

	merging from 950 to main branch
	Part 1 of 105  

Change 1292417 on 2014/12/19 by ppatil@ppatil-w7

	3912566: ESCALATION [INTERCALL]: Further Dial In Numbers Link missing from few Intercall Profiles

Change 1290207 on 2014/11/18 by ppatil@ppatil-w7

	3850917-EAR; Internal ; AR Intercall  audio loss\disconnect.

Change 1279848 on 2014/08/07 by ppatil@ppatil-w7

	3795010:Occurred Exception instead of Invalid telephony value when tried to create new audio Profile.

Change 1275632 on 2014/07/19 by satyam@p

	Fixing build script

Change 1261111 on 2014/04/23 by ppatil@ppatil-w7

	3737281-Enhancement [InterCall] - Send release conference signal after a sending end Conference message to Intercall

Change 1260399 on 2014/04/22 by abarora@abarorawin7

	Adding CCAPI documentation to Perforce

Change 1252323 on 2014/03/13 by ppatil@ppatil-w7

	B-30249 Improve Logging for Intercall Adpater
	
	3702092-Intercall conference fails to start with spifaultexception

Change 1220745 on 2013/09/25 by ppatil@ppatil-w7

	3623105: Dial-in details sometimes show country specific numbers and at other times shows numbers of all the countries.

Change 1184818 on 2013/05/10 by ppatil@ppatil-w7

	3506129- Escalation - [Xerox] - Telephony dropping when starting or stopping BOR

Change 1172821 on 2013/03/19 by ppatil@ppatil-w7

	3517601-Fatal error in Intercall whilst validating profile

Change 1172027 on 2013/03/15 by ppatil@ppatil-w7

	Back out revision 5 from //depot/main/AdobeConnect/components/adaptors/Intercall/src/com/macromedia/breeze_ext/telephony/Intercall/IntercallCallback.java

Change 1168670 on 2013/03/05 by ppatil@ppatil-w7

	3506129 - Escalation - [Xerox] - Telephony dropping when starting or stopping BOR

Change 1168129 on 2013/03/04 by satyam@satyam7-win7

	Bug#3495250:Pre-C9 Intercall profile's conference numbers not getting converted to Table if you EDIT/SAVE profile on webapp
	
	Problem:Intercall adaptor used the old method of saving conference numbers of a profile in profile fields instead of storing in the profile conf numbers table. The new table based UI is based on the profile conf numbers table. 
	
	 Fix:Fixed the Intercall adaptor to save conference number to the new profile conf numbers tables. This way, the profile display page shows the table based view of the conference numbers. New profiles always get their numbers stored in the conference numbers table. For old profiles, once they are edit/saved, the conf numbers get saved in the new table and are deleted from the profile fields where they were saved earlier. Hence on edit/saving and old profile, the display changes to the new table based conference number display. 
	
	Code Collab Review #1221141

Change 1114294 on 2012/09/19 by satyam@satyam-w7

	Static code analysis (Findbugs) integration with build process
	
	Code Collab Review#867740

Change 1113303 on 2012/09/18 by satyam@satyam7-win7

	Bug#3331953:Fix issue with Intercall and Meetingplace build scripts
	
	Fixing Intercall and Meetinplace build batch file
	1.Intercall build batch file was using the old jre etc.
	2.Meetingplace build script has the wrong default target
	3.Meetingplace build batch file did not copy the adaptor jar to the telephony service folder.
	
	Code Collab Review#864681

Change 1088194 on 2012/07/17 by satyam@satyam7-win7

	Bug#3224011:Active speaker notifications not coming on Maple
	
	Problem:The talker events are enabled for a conference when FMS app make an update conference call on the bridge via adaptor. There can be a race condition where the audio conference events start coming in even before this call could be made by FMS. In such a case, the talker notifications do not get enabled since the events have started  coming in even before the adaptor knows that it has to enable talker events. Typically this would happen if the audio conference was pre-started and the meeting room was launched later.  
	
	Fix:Addressed in the adaptor by sending out enable talker requests whenever it receives the update conference call from FMS Ap to enable talker notifications.
	
	Code Collab Review#734961

Change 1083342 on 2012/06/29 by satyam@satyam7-win7

	Bug#3224023:Host joins muted on Maple 
	Problem: Sometimes, when a host joins, a mute=true event is received for it, immediately followed by mute=false event. But occasionally the order of receiving these events is reversed, resulting in the host to appear as muted even though she is able to speak. 
	
	Fix: If the host is actually unmuted and is able to speak, talker events are received for her. If we see that we got a talker event for a muted user, we ask the bridge to send us their user state and we update the user state on our side appropriately. The muted state on the bridge is false because the user is able to speak and hence we also change the state on our side and show her as unmuted. 
	
	Code Collab Review#708522

Change 1078124 on 2012/06/18 by mhaque@NIZAM

	bug#3208292
	Hardening: InterCall: Verify if the link that points to InterCall for Further Dial In Numbers is valid
	Review #679980

Change 1072931 on 2012/06/05 by satyam@satyam7-win7

	Bug#3009883 & Bug#3175436 
	
	Problem: Since the event ordering is not guaranteed by Intercall, there can be race conditions on the list of participants in a conference. For e.g. if a participant leaves immediately after joining, her left event may be followed by joined event, resulting in ghost user in the Connect meeting. 
	
	Fix: Fixing synchronization issues with participant events. 
	
	
	Code Collab Review#1072929

Change 1064396 on 2012/05/16 by satyam@satyam7-win7

	
	Changes in this changelist#
	1.Bug Fix:#3175436:Host is automatically shown as muted when dialing into a conference using the call me feature
	Problem: If a ParticipantEvent is received before ParticipantAddedEvent for a participant, the participant gets added twice in the adaptor's participant list. Usually a mute followed by an unmute is send out by Intercall for a newly joined participant. Since the adaptor's participant list has duplicate entries, one of the entry gets unmuted while the other one remains muted. Now whenever talker events arrive for that participant, the muted entry is sent across to the meeting room with the talker event, resulting in the participant getting muted.
	
	Fix: Ensured that adaptor does not make duplicate entry in its participant list irrespective of the order of ParticipantEvent and ParticipantAddedEvent.
	
	2.Synchronized participants list as it is being modified concurrently by various event threads.
	
	3.Re-enabled talker notifications and roster reconcilliation whenever the participant count transitions from 0 to 1. This was asked by Intercall as otherwise talker notifications/roster reconcilliation gets disabled at bridge end as soon a nobody is left in the conference. Removed extraneous talker/roster reconcilliation enablement being done in the heartbeat based on the talkerNotified flag.
	
	
	Code Colab Review#600500

Change 1008454 on 2011/12/02 by ppatil@ppatil-w7

	Bug #3056827: Unable to get UV toll free number for US and because of this UV is broken

Change 1005243 on 2011/11/24 by akumardh@buildmeister_breeze

	Added log4j.jar path to ant classpath

Change 1002804 on 2011/11/17 by ppatil@ppatil-w7

	Adapters : JUL to Log4j 

Change 997562 on 2011/11/04 by ppatil@ppatil-w7

	2961764: For USA and Canada region customers, add missing "More dial-In information.." link in Dial-in to Audio conference box ( part of start conference window). 

Change 776631 on 2011/01/25 by nckalyan@KALYANDESK

	Increasing BOR capacity

Change 766806 on 2010/12/23 by akumardh@connect-branching

	Moving components from connectpro to AdobeConnect
	//depot/main/connectpro/components/...@766790=> //depot/main/AdobeConnect/components
	Part 3 of 3  

